REQUIREMENTS
CreateTech requires a purchase order to begin your project. When placing a purchase order with CreateTech, Buyer confirms that Buyer understands and agrees to CreateTech's Terms & Conditions.
CreateTech prefers a solid model and drawing, with correct dimensions and tolerances of your component. CreateTech has the capability to convert virtually all CAD file types (SolidWorks, Parasolid X_T, STEP, IGES, ETC.. If you are unable to supply a model of your component, CreateTech can model it for you. CreateTech is capable of model-based machining*, meaning a drawing is not required, only notes in your solid model defining the features. Please refer to the Tolerances section on this page.
* Charges may be incurred to create a working drawing.
OFFERS
Unless stated otherwise, all offers made by CreateTech shall be valid for a period of thirty (30) days from such offer. Unless accepted by the Buyer within offer validity period, CreateTech reserves the right to withdraw and/or revise its offer.
The prices offered by CreateTech apply only to the specific quantities, specifications, statement of work, delivery schedules, and terms and conditions set forth in CreateTech's Offer. To ensure accuracy, upon receipt of your purchase order, an acknowledgement of the terms regarding your order will promptly be returned to you for verification of your request.
Quoted lead times are an estimate and are not guaranteed. Quoted lead times are in business days, not including weekends or holidays.
Some factors that may delay delivery:
Current workload at the time your order is placed
Machinery malfunction
Engineering change order
Quantity adjustments
Machining complications
Supplier delays
PAYMENT TERMS
Payment is required upon delivery unless other terms have been arranged.
A deposit may be required for materials and tooling.
CANCELLING AN ORDER
An order cannot be cancelled once materials/tooling/shop time have been incurred. Please CONTACT US to discuss your options.
REFUND POLICY
Please CONTACT US to discuss your options.
SETUPS/FIXTURES/TOOLING
All machining operations require setting up the machine tool. Depending on the complexity of Buyer's component, setups can range from a few minutes to several hours. Custom fixtures are necessary to machine many components, additional material may need to be procured to machine your component. CreateTech uses a variety of standard cutters, occasionally features on Buyer's component require custom cutting tools. These tools and fixtures will be charged to the Buyer and maintained by CreateTech for Buyer's specific job.
TOLERANCES
CreateTech adheres to ANSI Y14.5 Geometric Dimensioning and Tolerancing. CreateTech will adhere to Buyer supplied drawings, tolerances and, specifications. Unspecified dimensions will be assumed to have a tolerance of +/-0.005".
(X.) +/- 0.1"
(X.X) +/- 0.015
(X.XX) +/- 0.010
(X.XXX) +/-0 .005
(X.XXXX) +/-0 .0005
RE-WORK
CreateTech will re-work or replace any work completed by CreateTech and determined to not meet specifications. Component must be returned in the same condition it was delivered.
SUPPLIED COMPONENT MODIFICATION
CreateTech will modify components sourced elsewhere that require additional machining. However, CreateTech will only be held responsible for the work contracted. Meaning if something goes wrong during operations, CreateTech will not supply a new component, however CreateTech will supply the modification work on replaced component at no additional cost.
ENGINEERING CHANGE ORDERS
Any revision to the design or quantity before production will void the quote provided. Once production has started, any and all changes will be implemented on the next order. If production must be stopped to accommodate the revision; cost, and lead time may need to be adjusted, please CONTACT US to discuss your options.
PRICING
Unless otherwise agreed in writing by a duly authorized representative of CreateTech, all prices are stated in US Dollars and all invoices issued by CreateTech and payments made by Buyer shall be in US Dollars.
All Shop rates have a minimum one hour charge unless specified otherwise.
Assembly, hardware, finishing and shipping costs are not included unless specified on quote.
Rates are subject to change without notice.
CAD Services - $150 per hour
CNC Programming - $150 per hour
Machining Operations and Setup - $125 per hour
Fabrication Services - $150 per hour
After hours/Emergency orders - CONTACT US for pricing and availability. No quotes supplied for emergency orders.
WARRANTY
EXCEPT AS SPECIFICALLY STATED HEREIN, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO ANY PARTS OR PRODUCTS MANUFACTURED BY CREATETECH ENTERPRISES. CREATETECH ENTERPRISES EXPRESSLY EXCLUDES AND DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANT-ABILITY AND ANY WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, APPLICATION OR USE, AND BUYER AGREES THAT THE GOODS ARE SOLD "AS IS." UNDER NO CIRCUMSTANCES WILL CREATETECH ENTERPRISES BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER SUCH DAMAGES ARE SOUGHT IN CONTRACT, IN TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE AND STRICT LIABILITY) OR OTHERWISE, AND CREATETECH ENTERPRISES LIABILITY SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PARTS OR PRODUCTS ON WHICH SUCH LIABILITY IS BASED. BUYER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS OR PROPERTY OF BUYER OR OTHERS ARISING OUT OF USE OR POSSESSION OF ANY PART OR PRODUCT SOLD BY CREATETECH ENTERPRISES INC.
LINKS
This website may contain links to websites operated by parties other than CreateTech. CreateTech does not control the content of of these sites. Inclusion of links on CreateTech's website, does not imply any endorsement of the websites content or any affiliation with its owners/operators.